Wall-mounted jib cranes use an existing or designed supporting structure. Select the mounting and working coverage together, with a structural review of the proposed connection.
Define the configuration
Selection item | What to provide |
|---|---|
Support | Wall/column material, drawings, member geometry and mounting location. |
Coverage | Required radius, slewing area and pickup/placement positions. |
Headroom | Hook height, hoist/tool size and overhead restrictions. |
Load path | Complete suspended load and the selected crane configuration. |
Check the installation boundary
An apparently solid wall or column is not evidence of adequate support. Use the model-specific reactions and connection requirements in the structural assessment.
Move from a layout to equipment
Prepare a workstation drawing and the required load/movement information. Review the actual model specifications and identify included hoist, controls and attachments before requesting the final installation and quotation scope.
Browse documented crane configurations · Compare crane formats · Installation planning · Complete cost scope
Further questions for your purchasing review
Which equipment and structural items affect the project cost?
Capacity, span, height, slewing or travel, lifting equipment, structural work and installation affect the total cost.
Draw the usable wall-mounted jib working area
A wall-mounted arrangement transfers crane reactions into its supporting structure. A convenient wall location is only a proposal until the structure and connections are reviewed.
Layout item | What to mark |
|---|---|
Support identity | Wall/column material, member dimensions and existing drawings. |
Connection position | Height and space for the mounting arrangement. |
Working arc | Required radius and approach on either side of obstructions. |
Engineering interface | Model-specific reactions, fixing arrangement and responsible structural designer. |
Documented equipment route
ET-CR-WALL — Wall-Mounted Jib Crane
Configure this structure for the proposed workstation layout, complete load and supporting conditions. Specify the required capacity, span or reach, height and mounting arrangement together with the lifting device and end tool.
Close the quotation interfaces
Responsibility | Agree in the proposal |
|---|---|
Structural design | Selected arrangement, loads/reactions and support/foundation requirements. |
Lifting equipment | Device, trolley/connection, tool and full suspended mass. |
Utilities | Electrical/air arrangement and moving supply path. |
Site work | Installation, access, commissioning and required records. |
Check all pickup and placement positions with the proposed arrangement before acceptance. Do not use another crane’s foundation, anchor dimensions or load chart for this installation.